How to get audio in Plex Media Player on Raspberry Pi 2

djs

• 1 min read

For some dumb reason they still haven't fixed this dumb bug...

  • SSH into your Pi. The username is root, password is plex.
  • Do these commands to open up config.txt in nano: mount -o remount,rw /flash and nano /flash/config.txt
  • Go to the bottom of config.txt and add this line: hdmi_force_edid_audio=1
  • Hit Ctrl X, then Y to save
  • Unmount and reboot: mount -o remount,ro /flash and reboot

(If you have your SD card handy you can also just plug that into your PC and you will find config.txt in the root of it, just add hdmi_force_edid_audio=1 to the bottom of that and save and it will have the same effect.)

And that's it. Now I get Stereo, AC3 5.1 and DTS 5.1 over optical into my soundbar from my Pi 2 running PMP 1.1.1.

Or you could just use Rasplex instead...

Footnote: for some dumb reason I couldn't use codeblocks. It just refused to, even though the preview in Atom was fine. I'm thinking it's Parsedown's fault.